• Speed: Scan a roll of 35mm film as quick as in two minutes using the precise knobs for advancing
• Stability: Sturdy rubber feet and a heavy steel construction to keep everything in place
• Leveling: More than 10mm fine threaded adjustment in each corner for getting a perfect scan
• Evenly lit scans: The film is lifted approximately 50mm off the light source to diffuse imperfections on the light
• Multi-format support: With adjustable rollers for most roll film formats ever made
• Access to accessories: Designed to accommodate attachments such as the Duster and future VALOI 360 Accessories.

What’s included in the Advancer kit?

Everything (except the camera) to get you started in home digitising!

1. Valoi 360 Advancer. A stable frame that holds the VALOI Holders about 50mm above the light source. Accepts any VALOI 360 Holder. Advancing mechanism lets the user feed the film into a roller system that moves the film to the next frame with precision and speed using either of the thumb knobs on each side of the device. The rubber rollers are adjustable to accommodate most roll-film formats that have been produced. The rubber feet allow roughly 10mm adjustment on each corner to assist in making the film plane parallel with the camera-sensor. Finally, there are two accessory slots on the front and back of the device, allowing for future extensions. 
2. Valoi 360 35mm Film Holder. Holds 35mm film with the purpose of scanning it using a digital camera. Flattens the film through a double S-curved track, allows film to be gently pulled through (unlike traditional clam-shell design holders), and avoids light reflections back onto the film.
3. Valoi 360 120 Film Holder. Holds 120 film (medium format) with the purpose of scanning it using a digital camera. Flattens the film through a double S-curved track, allows film to be gently pulled through the system, and avoids light reflections back onto the film. This holder also accepts the discontinued formats 220 and 620.
4. Valoi 360 Diffuser. Diffuses light sources that would otherwise have insufficient diffusion for use as scanning light sources (such as phones or tablets). The diffusion is deliberately not very strong to let as much light through as possible. It can be used with the Advancer either by screwing it onto the bottom or underneath the feet, or without the Advancer by placing either of the Holders directly on top of the Diffuser